Rywire Motorsport Electronics

RWD version of the Rywire K-series Engine Harness

Introducing our new Rear Wheel Drive specific K series engine wiring harness.

This Harness is designed for both Right and Left hand drive vehicles as well as K20 and K24 engines running 02-04 Kpro or OEM K20/A Computer's.

About the K-Series Engine Harness:

This harness offers Automotive quality wire. OEM color layout makes it easy to understand with factory wiring diagrams. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire covering and shielding.

Our harnesses are 100% quality tested pin to pin, and resistance checked to ensure no voltage fluctuations. These are the best harnesses money can buy. NO CORE is necessary when buying a harness from us!

These harnesses are warrantied and guaranteed to work, we provide excellent installation phone support and troubleshooting to ensure this reputation for quality, however they are non-refundable.

MADE IN THE U.S.A.

---

HARNESS CONNECTOR LIST
• VTEC solenoid	• Knock Sensor (KS) (Default 02-04 K20 style)	• H2o sending unit (For gauge cluster)
• VTC	• Intake Air Temperature (IAT)	• Reverse Lights (Default S2000 Reverse Lights)
• Oil Pressure Sending Unit	• Alternator	• Primary AFR o2 Sensor
• Crank Sensor (CKP) ( Default 02-04 K20 style)	• Manifold Air Pressure (MAP) (Default B-Series)	• Starter signal
• Coils 1-4	• Throttle Position Sensor (TPS) (Default B-Series)	• Computer plugs A, B and E
• Cam (CPS) Exhaust Side	• Idle Control Motor	• Power Distribution Cap
• Cam Intake Side	• Electronic speed sensor (VSS) (Default S2000 Speed Sensor)	• Ground
• Engine Coolant Temp (ECT) (02-04 K20 Style)	• Injectors 1-4 ( Default 02-04 K20)	• 6 Extra Wires