Rywire Motorsport Electronics

This is the perfect solution for all your chassis harness needs. Our state of the art system includes:
1) Power Distribution Unit. Our solid state fuse-less system is a fully configurable 14 output systems.

2) Chassis Wiring Harness. Utilizing Deutsch connector systems.

3) Optional Front Harness. Plug and play Head lights, Indicators,Fans. ($100 extra when ordered with system)

4) Optional Rear Harness. Plug and play Tail lights, Indicators,Fuel level, Fuel pump. ($100 extra when ordered with system)

5) Optional Gauge/Cluster Harness. Plug and play Gauge cluster and Brake light switch. ($100 extra when ordered with system)

6) Optional Switch Panel. 6 Toggle switch system with mounting plate. ($150 extra when ordered with system). Ignition Switch, Start Button, Fuel Override, Fan Override, Headlights, Indicator Switches.

7) Optional CAN Keypad. 12 button CAN open keypad with LED.

8) Optional Circuit Breaker Works excellent for a master kill, or "Storage Switch" when not driving the vehicle. Install between PDM power stud and battery source.

9) Keypad Label Sheet Keypad labels for the Moristech Keypad

10) Wiring installation instruction pin-out with color and wiring schematic.

Pre-configured on this system is the following (Outputs can be re-assigned by user).

OUTPUTS (22amp):
-Starter
-Coils
-Fuel Pump1 & Fuel Pump2 (2 outputs)
-Fan1 & Fan2 (2 outputs)

OUTPUTS (10amp):
-Headlights / Taillights
-ECU
-Right Indicator
-Left Indicator
-Hi Beam Headlights
-Brake Lights
-Spare Front Output
-Spare Rear Output


INPUTS (hi or low activation):
-Master switch
-Fan switch
-Starter switch
-Brake light switch
-Headlight switch
-Fuel pump switch
-Hi Beam Headlights or H20 pump switch
-Indicators switch (Right and Left)

Also on board - included wires for:
-fuel level sender
-reverse lights
-fault indicator
-speed sensor
-charge warning
-ecu malfunction indication lamp
-low oil warning lamp
-tachometer signal
-ecu service check signal
-water gauge
-battery supply wire (to master disconnect)
-ecu memory power
-ground
-CAN (hi and low) Keypad


PDM Specs:
-6 22amp Outputs, 8 10amp Outputs, 9 switched inputs
-120amp max
-programmable outputs with easy to use software
-on board data logging for total and individual current draw
-compact case size
-System weight ~4lbs

Harness specs:
-Harness is constructed with Tefzel wire
-Deutsch and AMP connectors for quality connections
-Easily expanded and adapted to fit different style chassis
-Made to plug into different Rywire engine harnesses, as well as used universally.
-Color coded wires make wiring into any chassis easy (plug and play options avaliable).
-Constructed with quality split sleeve wire loom allows you to re-direct circuits cleanly and easily.
-Pre-programmed and pre-assigned so no need to learn complicated logic.

Software Download - > https://moristech.com.au/pages/pcm-software


***This item may have a lead time. Please email for current expected time***



Questions and Answers

Q: Is this for a street car?
A: Not really, this harness is a extremely stripped down system, not to be used with creature comforts found in a street driven, daily driver.

Q: Does this harness have AC
A: Easy answer is NO. There is no pre-wired circuits for AC.

Q: Can this harness run my power windows?
A: It can POWER your power windows, but it is not pre-wired for them. We recommend running the power windows to a fused constant power source and keeping them off the Rywire harness.

Q: Can this harness power another pump or device?
A: Yes, this harness has 14 outputs. For example, if you only need 1 Fan, or Fuel pump, you can for example borrow that channel to power what you need. The harness is loomed with a split braid for this reason, we assume the user will re-direct some circuits.

This instruction is a wiring diagram for the Moristech PDM 14 Unit. [ RIGHT CLICK AND "SAVE AS" TO SAVE PDF FILE ]